ENGLISH
11
ASSEMBLING AND PREPARING
Setting up the TV
Attaching the Stand
If you are not mounting the TV to a wall, use the
following instructions to attach the stand.
1
Place the TV with the screen side down on a
flat and cushioned surface.
2
Attach the Stand Base from Stand Body by
turning the screw to the right with a Coin.
Lay a foam mat or soft protective cloth
on the surface to protect the screen from
damage.
When attaching the stand to the TV,
place the screen facing down on a
cushioned table or flat surface to protect
the screen from scratches.
CAUTION
3
Attach the Stand Base from the TV.
Tighten the screws firmly to prevent the TV
from tilting forward. Do not over tighten.
CAUTION
To Next Page
Loading...
Need help?
General
