97
3 Press Call settings.
4 Press
TTY mode.
5 An explanation message is displayed.
6 Press
to continue.
7 Use the Directional Key
to highlight a setting, then press [Set].
TTY full: Users who cannot talk or hear send and receive a text message
through TTY
equipment.
TTY + talk: Users who can talk but cannot hear receive a text message and
send voice through
TTY equipment.
TTY + hear: Users who can hear but cannot talk send a text message and
receive voice through TTY equipment.
TTY off: Users send and receive without TTY equipment.
Connecting TTY Equipment and a Terminal
1 Connect a TTY cable to TTY connection on the terminal (TTY connection location
is the same as a headset jack).
2 Enter the phone menu and set the desired TTY mode.
3 After setting a TTY mode, check the LCD screen of the phone for the TTY icon.
4 Connect the TTY equipment to the power source and turn it on.
5 Make a phone connection to the desired number.
6 When connection is made, use the TTY equipment to type in and send a text
message or send voice.
7 The voice or text message from the receiver end displays on the TTY equipment
display
.
To Next Page
Loading...
