LG 23LX1RV - When Connecting with an S-Video Cable; External AV Source Setup

16
RL
AUDIO VIDEO
S-VIDEO
Camcorder
Video Game Set
1
1
2
3
Connect the S-VIDEO output of the external
equipment to the S-VIDEO input on the set.
Connect the AUDIO jacks between TV and exter-
nal equipment. Match the jack colors (Video = yel-
low, Audio Left = white, and Audio Right = red).
Select S-Video input source with using the TV/AV
button on the remote control.
Operate the corresponding external equipment.
Refer to external equipment operating guide.
External AV Source Setup
When connecting with an S-Video cable
S-VIDEO
OUT
IN
(R) AUDIO (L)
VIDEO
ANT OUT
ANT IN
VCR
TV side panel
1
2
TV side panel
External Equipment
4
2
1
2
3
4
Connect the an S-VIDEO output of the VCR to the
S-VIDEO input on the set. The picture quality is
improved; compared to connecting a regular VCR
to the Video input.
Connect the audio outputs of the VCR to the
AUDIO input jacks on the set.
Insert a video tape into the VCR and press PLAY
on the VCR. (Refer to the VCR owner’s manual.)
Select S-Video input source with using the TV/AV
button on the remote control.
Do not connect to both Video and S-Video at
the same time.