Copyright©2008 LG Electronics.Inc.All right reserved - 13 - LGE Internal Use Only
Only for training and service purposes
This system should be connected as shown below
Note: Do not connect VGA and DVI-HDMI cable with ISP board at the same time
DDC connect for HDMI (DVI-HDMI cable) DDC connect for VGA
2) Preparations
Running Port95nt.exe to install Driver LINK Port I/O Driver, and restart PC. (as picture 4)
Picture 4
Connect to PC
Connect to TV
HDMI port
12V
Connect to
TV VGA port
To Next Page
Loading...
