27ART10AKPL
www.lg.com
1
4
Disassembly
Position the screen vertically.
2
Push the top of the screen lightly in the
direction of the arrow to disassemble
a part of the cover space.
3
Use a wedge or pull it with your hand
to completely disassemble the cover.
Position the screen horizontally and
disassemble the cable holder screw.
5
Lower the rear lever and push the bottom
of the screen forward, as shown in the figure.
6
Lift the screen, separate the top
of the screen, and hold the screen.
7
Press the plug lock, push it in the direction of the arrow,
and then disassemble the screen completely.
8
Lay the stand on the box packaging, remove the four screws,
and then disassemble the stand bar.
※ Caution
Avoid pushing it hard.
There is a risk of damage.
※ Do not lift the plug or pull it downward
when disassembling the screen.
Keep the disassembled screen close to the
stand at a distance of 10 cm (4 inches) or
less.
M4L10
1X
M4L34
4X
Plug lock
*MFL717564982209REV00*
Printed in Korea
To Next Page
Need help?
General
