LG 27BK4 series - EasyWriter Software Installation

 1.2 USB cable is connected with PC(or Desktop PC)
HDMI(or D-Sub) cable is connected on Monitor.
** If there is only DVI port on Monitor, you can use HDMI to DVI cable instead of HDMI cable
Connect
to PC
Set(Monitor)
Connect to Monitor
Connect to PC
1. Kinds of ISP Program
 1.1 Install program “EasyWriter_20160505.exe” with below sequence
- Right click of Install program then install with as administrator.
- Reboot PC
- Open NVT EasyWriter program then connect zig and USB cable
Novatek
Suffix “V”
Novatek JIG
(P/N RAD32227901)