LG 27BP95E - Page 17

17
ENGLISH
Menu Settings
1 To view the OSD menu, press the joystick button at the bottom of the monitor and then enter the
[Settings].
2 Move the joystick up/down and left/right to set the options.
3 To return to the upper menu or set other menu items, move the joystick to or pressing ( ) it.
4 If you want to exit the OSD menu, move the joystick to until you exit.
[Input] [Picture] [General]
NOTE
• : On
• : Off
[Input]
[Settings] > [Input]
• [Input List]: Selects the input mode.
• [Aspect Ratio]: Adjusts the aspect ratio of the screen. The display may look the same for [Full Wide],
[Original], and [1:1] options at the recommended resolution (3840x2160) and 1920x1080.
- [Full Wide]: Displays the video in widescreen, regardless of the video signal input.
- [Original]: Displays video according to the aspect ratio of the video signal input.
- [1:1]: The aspect ratio is not adjusted from the original.
» In [1:1] mode, the 1920 x 1080 and 2048 x 1080 resolutions will output image scaled.
» In [1:1] mode, the 2048 x 1080 and 4096 x 2160 resolutions will show the screen with the left/right
sides cut off.
• [Input Range]: Control the black and white levels in the video signal.
- [Auto]: Automatically recognizes the input range of input signals and displays images appropriately.
- [Full]: Not extended the input signal.
- [Narrow]: Extended from 16 ~ 235 (10bits: 64 ~ 940) to 0 ~ 255 (10bits: 0 ~ 1023).
- [SDI Range]: Extended from 1 ~ 254 (10bits: 4 ~ 1019) to 0 ~ 255 (10bits: 0 ~ 1023).
- [Super White]: Extended from 16 ~ 254 (10 bits: 64 ~ 1019) to 0 ~ 255 (10 bits: 0 ~ 1023).