How to enable disabled features on LG 27MP500-B.AEK?
If some features are disabled on your LG Monitor, it could be because the OSD is locked. To resolve this, disable OSD Lock in the General settings.
What to do if images are displayed without sound on my LG Monitor?
If images are displayed without sound on your LG Monitor, ensure that the headphone port connections are properly made. Also, try increasing the volume using the joystick. Finally, set the audio output of the PC to the monitor you are using. Note that the settings may differ depending on the operating system.
What to do if the LG 27MP500-B.AEK displays nothing due to frequency range issues?
Signals transferred from your PC (graphics card) might be outside the horizontal or vertical frequency range supported by the monitor. Refer to the Product Specification section of this manual to set the appropriate frequency.
Why is there no sound from the headphone port on my LG 27MP500-B.AEK?
Make sure the headphone port connections are properly connected. Also, try increasing the volume using the joystick. Finally, set the audio output of your PC to the monitor you are using. The settings may vary depending on your operating system.
How to fix LG Monitor when nothing is displayed on the screen?
If nothing is displayed on your LG Monitor screen, first ensure the power cord is correctly plugged into the power outlet. Also, check the signal cable between your PC and the monitor to make sure it's properly connected. If the issue persists, it could be due to the signals transferred from the PC being out of the monitor's frequency range. Refer to the Product Specification section of the manual to set the appropriate frequency.
Why does image sticking occur on my LG 27MP500-B.AEK Monitor even when it's off?
If image sticking occurs on your LG Monitor even when it is turned off, it may be due to displaying a still image for a prolonged time, which can cause damage to the screen and result in image retention. To extend the lifetime of your monitor, use a screensaver.
Why are some functions not available when I press the Menu button on my LG 27MP500-B.AEK Monitor?
If some functions are not available when you press the Menu button on your LG Monitor, it is likely that the OSD is locked. To resolve this, disable OSD Lock in the General settings.
Why does image sticking occur on my LG 27MP500-B.AEK even when it's turned off?
Displaying a still image for a prolonged time may cause damage to the screen of your LG Monitor, resulting in the retention of the image. To extend the lifetime of the monitor, use a screensaver.
Why does image sticking occur even when my LG 27MP500-B.AEK Monitor is turned off?
Image sticking on your LG Monitor, even when turned off, can occur if a still image is displayed for a prolonged time, potentially damaging the screen and causing image retention. To extend the monitor's lifespan, use a screensaver.
Why does my LG 27MP500-B.AEK show 'Unrecognized monitor, Plug and Play (VESA DDC) monitor found' message?
If you see an 'Unrecognized monitor, Plug and Play (VESA DDC) monitor found' message on your LG Monitor, be sure to install the display driver from the LG website: http://www.lg.com. Also, make sure to check if the graphics card supports Plug and Play function.
General| Screen Size | 27 inches |
|---|---|
| Panel Type | IPS |
| Refresh Rate | 75 Hz |
| Brightness | 250 cd/m² |
| Contrast Ratio | 1000:1 |
| VESA Mount | 100 x 100 mm |
| Aspect Ratio | 16:9 |
| Color Gamut | sRGB 99% |
| Resolution | 1920 x 1080 |
| Response Time | 5 ms |
| Ports | HDMI, VGA |
| Viewing Angle | 178° (H) / 178° (V) |
To Next Page
