LG 28LX570M - User Manual

Other manuals for LG 28LX570M

Commercial Mode Setup Guide80 pages

Easy Setup Guide66 pages

Questions and Answers

S
Stephanie BellAug 16, 2025
Why is my LG 28LX570M TV remote not working?
- K
  Kara HallAug 16, 2025
  If your LG TV remote isn't working, ensure it's in TV Mode by using the MODE key, if applicable. Point the remote directly at the IR receiver on the TV. If the remote is too far away, move it closer, darken the room, and remove any obstructions blocking the path. Also, replace the batteries if they are weak, and ensure they are inserted with the correct polarity (+ and -). Finally, dim the room light if there's too much light interfering with the remote's signal. If none of these actions work, the remote IR codes may not match the settings in the TV. Make sure the Installer Remote is compatible and contact your LG representative if necessary. Check the settings both in the TV and on the remote.
S
Samuel GrayAug 19, 2025
Why does my LG 28LX570M have normal picture but no sound?
- D
  Diane HudsonAug 19, 2025
  If your LG TV displays a normal picture but has poor or no sound, the issue could be due to a broadcast problem. Try tuning to a different channel to see if the sound returns. Alternatively, the audio might be muted. Press the MUTE button or use the Volume Up key to increase the sound level. Another possibility is that the pillow or TV speaker is not configured properly. Check that Installer Menu items 020 FEATURE LEVEL and 027 HOSPITAL MODE are set as required. If applicable, select TV Speaker in the Audio Menu.
B
brian62Aug 22, 2025
What to do if no channels are present after Express Script on LG TV?
- N
  nwebbAug 22, 2025
  If no channels are present on your LG TV after running the Express Script, it's likely that Auto Tuning was not run. Refer to the Express Script procedure to run Auto Tuning, which is necessary to populate the channel lineup. To reactivate the Express Script, restore the TV to a factory default condition.
E
Edward WilliamsAug 26, 2025
What to do if my LG 28LX570M TV has no picture?
- T
  Toni GriffithAug 26, 2025
  If your LG TV shows no picture, first ensure that the TV is turned ON. If it is, check that the antenna or cable is correctly connected to the TV. Verify all connections to the TV are secure. If you're using an MPI device, ensure the MPI cable is connected. The issue could also be due to an encrypted program, so try switching to another channel. Finally, check and adjust the Installer Menu settings to ensure the correct tuning band is selected.
K
Kathryn CoffeyAug 28, 2025
What causes communication error on my LG 28LX570M?
- M
  Michael LarsonAug 29, 2025
  If you encounter a Communication Error (Communications Timeout) on your LG TV, start by checking and connecting all communication cables. Ensure the TV power cord is connected and that the TV is turned ON, as determined by the default setting of Installer Menu item 118 POWER SAVINGS. If you're using the FTG Device Configuration Application, verify that you've selected the correct COM port for the cable being used.
B
Benjamin WilliamsAug 31, 2025
How to fix 'Inactive TV' message on LG 28LX570M?
- L
  louis46Aug 31, 2025
  If your LG TV displays the message “Inactive TV” and then turns OFF, it's likely because the TV is set up to show this message when all channels are deleted from Channel Bank 4. To resolve this, simply select another channel bank (1, 2, or 3) to return the TV to normal operation.
C
Carol LandrySep 3, 2025
How to fix LG 28LX570M TV when I cannot enter channel number directly?
- L
  Louis DrakeSep 3, 2025
  If you can't directly enter a channel number on your LG TV, it might be because the TV is in Pass-through Mode and Installer Menu item 028 CH. OVERIDE is set to 0, which disables direct keypad entry. To enable it, set 028 CH. OVERIDE to 1. Alternatively, if the TV is in FTG Mode, the channel you're trying to enter might not be included in the FTG Channel Map. If needed, make changes to the FTG Channel Map using the FTG File Manager or the FTG Device Configuration Application.
C
Christopher FuentesSep 6, 2025
Why channel found during auto tuning does not tune in with channel up/down on LG 28LX570M?
- P
  porterjohnSep 6, 2025
  If a channel found during Auto Tuning on your LG TV doesn't tune in with the Channel Up/Down buttons, the channel was likely deleted in the currently selected channel bank. Premium channels may only be available on another channel bank. To resolve this, modify the channel bank allocation(s) for the channel using the FTG Channel Map Editor in the FTG File Manager.
K
Kyle MaynardSep 9, 2025
Why is channel blanked in all channel banks on LG 28LX570M TV?
- K
  Kimberly CaseySep 9, 2025
  If a channel is blanked in all channel banks on your LG TV, it's because blanking a channel in one channel bank makes it blank in all. To restore normal operation, modify the channel attributes using the FTG Channel Map Editor in the FTG File Manager. Uncheck the “Blank Video” checkbox for the channel to restore it across all channel banks.
R
Robert WolfeSep 12, 2025
Why does LG 28LX570M show Input List Menu when CH. BANK is pressed?
- N
  Nicholas HansonSep 12, 2025
  If pressing CH. BANK on the Installer Remote of your LG TV brings up the Input List Menu, it indicates that Installer Menu item 027 HOSPITAL MODE is set to 0. To enable channel banks to appear when pressing the CH. BANK key, set item 027 to the appropriate setting.