LG 28MQ750

22
ENGLISH
• [Input Compatibility Version] : Set Input Compatibility Version to the same version as the connected external
device.
- In case of DisplayPort and USB-Cset to 1.4 orover to use the HDR function.
- In case of HDMI input, set to 2.0 or over to use the HDR function.
• [Buzzer]: This feature lets you set the sound generated from Buzzer when your monitor powers on.
• [User-defined Key]: You can customise the main menu to access your preferred menu easily.
- [PBP]: Displays the screens of two input modes on one monitor.
- [Picture Mode]: Sets the picture mode.
- [KVM Switch]: Select the USB upstream cable connection port to use USB hub of the monitor.
• [OSD Lock] : This feature disables the configuration and adjustment of menus.
All features are disabled except [Brightness], [Auto Brightness], [Contrast], [Volume] and [PBP] on [Quick
Settings], menus of on [Input], and [OSD Lock] and [Information] of [General].
• [Information] : The following display information will be shown; [Total Power On Time], [Resolution].
• [Reset to Initial Settings] : Returns to the default settings.
NOTE
• [SMART ENERGY SAVING]
- The value of energy saving data may differ depending on panel and panel suppliers.
- If you select the option of [SMART ENERGY SAVING] is [High] or [Low], monitor luminance become higher
or lower depend on source.