LG 28MT45M - SPECIFICATIONS; Application Range and Product Specs; Test Methods; Interface Specifications

- 6 -
LGE Internal Use Only
Copyright © LG Electronics. Inc. All right reserved.
Only for training and service purposes
SPECIFICATION
1. Application Range
This spec sheet is applied all of the TV used LW45A chassis.
2. Specication
Each part is tested as below without special appointment
1) Temperature : 25 ˚C ± 5 ˚C (77 ˚F ± 9 ˚F),
CST : 40 ˚C ± 5 ˚C
2) Relative Humidity : 65 % ± 10 %
3) Power Voltage : Standard input voltage
(100 V - 240 V ~, 50 / 60 Hz)
· Standard Voltage of each products is marked by models
4) Specication and performance of each parts are followed
each drawing and specication by part number in accord-
ance with BOM.
5) The receiver must be operated for about 5 minutes prior to
the adjustment.
3.Test method
1) Performance : LGE TV test method followed
2) Demanded other specication
- Safety : CE,IEC specication
- EMC : CE,IEC specication
NOTE : Specications and others are subject to change without notice for improvement.
4. General specication
4.1. Operating/Storage environment
4.2. RGB-PC
No. Item Specication Remarks
1 Supported Sync. Type Separate Sync.(RGB)
2 Operating Frequency Analog
Horizontal 30 ~ 69 kHz
22MT44A /24MT44A/22MT44N/24MT44N
22MT45A /24MT45A/28MT45A/ 28MT45M
Vertical 56 ~ 61 Hz
3 Resolution Analog
Max 1920×1080 @ 60 Hz
22MT44A /22MT45A/22MT44N
Recommend 1920×1080 @ 60 Hz
Max 1366×768 @ 60 Hz
24MT44A/24MT44N
24MT45A/28MT45A/ 28MT45M
Recommend 1366×768 @ 60 Hz
1 Operating Environment
Temp : 10 °C ~ 35 °C
Humidity : 20 % ~ 80 %
2 Storage Environment
Temp : -10 °C ~ 60 °C non condensing
Humidity : 5 % ~ 90 % non condensing