- 10 -
4.1.2. S/W program download
• Preliminary steps
4.1.2.1 Download method 1 (PCB Ass’y)
(1) Connect the download jig to D-sub jack
(2) Execute ‘Download.vi2c’ program in PC, then a main
window will be opened
(3) Double click the blue box and confirm "Bootloader
Version" as 40.
(4) Click the "Erase Flash" button
(5) Double click the download file low, then "edit"
window will be opened
(6) Click the choice button in the "edit window", then
"file choice window" will be opened
(7)Choose the Hex file in folder and execute
downloading with click " open" button.
=> Select the "Bootloader.bat" file(install >
VCTP_download > Bootloader)
=> Push "OK"
=> Finish the program, after saving the file
"download_cs.vi2c"
(if you click , the massage appears automatically)
x
To Next Page
Loading...
