LG 32LD310H - Page 43

No OSD Trouble Shooting guide
Check LVDS Cable
Check LCD Module
Control board
Y
Replace Cable
N
Check P401 All
Voltage Level (5V, 12V, 16V)
Check power connector and
RL_ON(pin1) signal OK ?
Replace Power board
NY
Check Q409 output Voltage(12V)
Y
Check Q409 application circuit or
replace Q409
N
Copyright ⓒ 2011 LG Electronics. Inc. All right reserved.
Only for training and service purposes
LGE Internal Use Only