EXTERNAL EQUIPMENT SETUP
50
EXTERNAL EQUIPMENT SETUP
Screen Setup for PC mode
Selecting Resolution
You can choose the resolution in RGB-PC mode.
The
PPoossiittiioonn
,
PPhhaassee
, and
SSiizzee
can also be adjusted.
Select
PPIICCTTUURREE
.
Select
SSccrreeeenn
.
Select
RReessoolluuttiioonn
.
Select the desired resolution.
Auto config.
Resolution
G
Position
Size
Phase
Reset
Screen
Move
Prev.
1
Select
PPIICCTTUURREE
.
Select
SSccrreeeenn
.
Select
AAuuttoo ccoonnffiigg..
.
1
Enter
Move
PICTURE
• Contrast 100
• Brightness 50
• Sharpness 70
• Color 70
• Tint 0
• Advanced Control
• Picture Reset
Screen
RG
E
1024 x 768
1280 x 768
1360 x 768
Auto Configure
Automatically adjusts picture position and minimizes image instability. After adjustment, if the image is still
not correct, try using the manual settings or a different resolution or refresh rate on the PC.
Auto config.
G
Resolution
Position
Size
Phase
Reset
Screen
Move
Prev.
To Set
Select
YYeess
.
4
Start Auto Configuration.
5
• If the position of the image is still not correct,
try Auto adjustment again.
• If picture needs to be adjusted again after Auto
adjustment in RGB-PC, you can adjust the
PPoossiittiioonn
,
SSiizzee
or
PPhhaassee
.
Yes No
Enter
Move
PICTURE
• Contrast 100
• Brightness 50
• Sharpness 70
• Color 70
• Tint 0
• Advanced Control
• Picture Reset
Screen
RG
E
MFL58486305-Edit1-en- 5/28/10 2:32 PM Page 50