LGE Internal Use OnlyCopyright LG Electronics. Inc. All right reserved.
Only for training and service purposes
- 8 -
1) Optical characteristics are determined after the unit has been ‘ON’ and stable in a dark environment at 25±2°C
2) Surface luminance is the luminance value at center 1-point across the LCD surface 50cm from the surface with all pixels
displaying white.
No. Item Specification Min. Typ. Max. Remark
1. Viewing Angle<CR>10> Right/Left/Up/Down 89 CR > 10
Luminance (cd/m
2
) 400 500
2. Luminance
Variation - 1.3
3. Contrast Ratio CR 1000 1400 All white/ All black
White WX 0.279
WY Typ 0.292 Typ
RED Xr - 0.03 0.642 +0.03
4. CIE Color Coordinates Yr 0.334
Green Xg 0.292
Yg 0.607
Blue Xb 0.146
Yb 0.056
4.1.2. 32” LCD Module (LGD) LC320WUG-SCA1
1) Optical characteristics are determined after the unit has been ‘ON’ and stable in a dark environment at 25±2°C
2) Surface luminance is the luminance value at center 1-point across the LCD surface 50cm from the surface with all pixels
displaying white.
No. Item Specification Min. Typ. Max. Remark
1. Viewing Angle<CR>10> Right/Left/Up/Down 89 CR > 10
Luminance (cd/m
2
) 400 500
2. Luminance
Variation - 1.3
3. Contrast Ratio CR 1100 1500 All white/ All black
White WX 0.279
WY Typ 0.292 Typ
RED Xr - 0.03 0.639 +0.03
4. CIE Color Coordinates Yr 0.334
Green Xg 0.289
Yg 0.606
Blue Xb 0.145
Yb 0.065
4.1.3. 37” LCD Module (LGD) LC370WUG-SCA1