EXTERNAL EQUIPMENT SETUP
EXTERNAL EQUIPMENT SETUP
44
ANTENNA
CABLE IN
RGB IN (PC)
AUDIO IN
RGB/DVI
(DV )
/DVI I
COMPONENT IN
AV IN
RS-232C IN
(
CONTROL&SERVICE)
1 2
VIDEO
AUDIO
L(MONO)
R
EO
AUDIO
YP
B
P
R
L R
OPTICAL
D GITAL
AUDIO OUT
AUDIO OUT CONNECTION
Send the TV’s audio to external audio equipment via the Audio Output port.
If you want to enjoy digital broadcasting through 5.1-channel speakers, connect the OPTICAL DIGITAL
AUDIO OUT terminal on the back of TV to a Home Theater (or amp).
!
NOTE
When connecting with external audio equipment, such
as amplifiers or speakers, you can turn the TV speakers
off in the menu. (
p.119)
CAUTION
Do not look into the optical output port. Looking at
the laser beam may damage your vision.
Audio with ACP (Audio Copy Protection) function may
block digital audio output
.
1. How to connect
1
Connect one end of the optical cable to the
TV port of OPTICAL DIGITAL AUDIO OUT.
2
Connect the other end of the optical cable to
the digital audio input on the audio equip-
ment.
3
Set the “TV Speaker option - Off” in the
AUDIO menu. (
p.119). See the external audio
equipment instruction manual for operation.
1
2
To Next Page
Loading...
