- 16 -
LGE Internal Use OnlyCopyright © LG Electronics. Inc. All rights reserved.
Only for training and service purposes
DISASSEMBLY
1. Disassembly of Back cover
(1) Unscrew bolts in the set.
(2) Check both right and left hole.
(3) Attach tape to ‘Long nose pliers’.
* Scratch can be caused without tape.
(4) Put ‘long nose’ into the hole.
(5) Open B/C with push/pulling long
nose to upper and lower sides.
(6) Disassemble Back cover.
* Disassemble it from left to right for top
side hook on Back cover
To Next Page
Loading...
