To Next PageTo Next PageWhy does my LG LED TV turn off suddenly?
If your LG LED TV turns off suddenly, the power supply may be interrupted, so check the power control settings. Also, check if the Sleep Timer or Timer Power Off feature is enabled within the Timers settings. If the TV is on but not receiving a signal, it will automatically turn off after 15 minutes of inactivity.
What to do if my LG 32LF595B turns off suddenly?
If your LG LED TV turns off unexpectedly, it could be due to a few reasons. First, the power supply might be interrupted, so check the power control settings. Second, the Sleep Timer or Timer Power off function may be activated in the Timers settings. Finally, if the TV doesn't receive a signal for 15 minutes, it will automatically turn off.
How to fix LG 32LF595B LED TV remote control not working?
If you cannot control your LG LED TV with the remote, first check the remote control sensor on the TV and try again. Ensure there are no obstructions between the remote and the TV. Also, verify that the batteries in the remote are working and properly installed.
What to do if my LG LED TV has no image and sound?
If your LG LED TV is not displaying an image and there is no sound, first ensure that the TV is powered on. Next, verify that the power cord is securely connected to a functioning wall outlet. You can test the outlet by plugging in another device to see if it works.
What to do if my LG 32LF595B LED TV has vertical/horizontal bars, residual image, light spot, or external device color error?
If your LG LED TV displays vertical or horizontal bars, a residual image, a light spot, or an external device color error, first check the color condition by input. Then check the external device. If the problem persists, replace the Main B/D or request repair for the external device.
Why my LG 32LF595B LED TV remote control is not working?
If you cannot control your LG LED TV with the remote, there might be a few reasons. Ensure that there are no obstacles blocking the path between the remote and the TV's sensor. Also, verify that the batteries in the remote are working and properly installed. Finally, check the remote control sensor on the TV and try again.
What to do if my LG 32LF595B LED TV picture is broken or freezing?
If your LG LED TV picture is broken or freezing, you should first check the RF signal level and try reconnecting the picture. If the issue persists, try installing a booster. If these steps don't resolve the problem, contact your signal distributor or broadcaster (Cable or Air) or perform a software upgrade.
What to do if my LG 32LF595B has no video and no audio?
If your LG LED TV has no video and no audio, check the voltages of the Power Board. If necessary, replace the Power Board and repair parts.
Why does my LG TV tilt forward after installing it?
If your LG TV tilts forward after installation, ensure that all screws are securely tightened.
General| Screen shape | Flat |
|---|---|
| Response time | - ms |
| Display diagonal | 32 \ |
| Display brightness | - cd/m² |
| Display resolution | 1366 x 768 pixels |
| Native aspect ratio | 16:9 |
| Native refresh rate | 60 Hz |
| LED backlighting type | - |
| Supported video modes | 720p |
| Display diagonal (metric) | 81.28 cm |
| Supported graphics resolutions | 1366 x 768 |
| Audio formats supported | AAC HE, AC3, EAC3, MP3, PCM |
| Image formats supported | JPG |
| Video formats supported | DIVX HD, MPEG |
| Product color | Black |
| Panel mounting interface | 200 x 200 mm |
| Tuner type | Digital |
| Operating system version | 2.0 |
| Operating system installed | Web OS |
| Audio decoders | Dolby Digital, DTS |
| RMS rated power | 10 W |
| Number of speakers | 2 |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | 0.3 W |
| PC in (D-Sub) | No |
| Composite video in | 1 |
| DVI-D ports quantity | 0 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Consumer Electronics Control (CEC) | SimpLink |
| Package width | 812 mm |
| Package height | 508 mm |
| Package weight | 7257 g |
| Sustainability certificates | ENERGY STAR |
Weight and Dimensions| Depth (with stand) | 203 mm |
|---|---|
| Height (with stand) | 457 mm |
| Weight (with stand) | 6200 g |
| Depth (without stand) | 50 mm |
| Width (without stand) | 711 mm |
| Height (without stand) | 431 mm |
| Weight (without stand) | 6000 g |
Instructions for setting up the TV on a table with proper ventilation and power connection.
Details on connecting and using an optional security system for the TV.
Steps to secure the TV to a wall using VESA standard mounts and optional brackets.
Guide for connecting an antenna, cable, or cable box to the TV for viewing.
Explanation of functions and usage of the LG Magic Remote control.
Important safety and operational precautions for using the Magic Remote control.
Technical specifications for the TV, including wireless module details and environment conditions.
List of commands and their corresponding data for controlling the TV remotely.
Format for successful communication acknowledgement between the TV and control device.
Format for error communication acknowledgement from the TV.
Conversion table for hexadecimal data to decimal for channel selection.
