10
ENGLISH
LCD TV Models : 32/37/42/47LH70
**
Connect the cables as necessary.
To connect additional equipment, see the
EExxtteerrnnaall eeqquuiippmmeenntt SSeettuupp
section.
1
2
Align the hole with the tab on the
CCAABBLLEE
MMAANNAAGGEEMMEENNTT CCLLIIPP
.
Turn the
CCAABBLLEE MMAANNAAGGEEMMEENNTT CCLLIIPP
as shown.
Note : that excessive force might cause damage to
the product when using Cable Management clip.
NOTE
GG
Do not use the CABLE MANAGEMENT CLIP to lift the TV.
- If the TV is dropped, you may be injured or the TV may be damaged.
CABLE MANAGEMENT CLIP
How to secure the power cable
(Only 32/37/42/47LH70
**
)
PROTECTIVE BRACKET
Secure the power cable with the PROTECTIVE
BRACKET and the bolt as shown. It will help prevent
the power cable from being removed by accident.
1
Installing Batteries
■
Open the battery compartment cover on the
back and install the batteries matching cor-
rect polarity (+with +,-with -).
■
Install two 1.5V AAA batteries. Do not mix old
or used batteries with new ones.
■
Close cover.
Install the power plug
closely.
Use of ferrite core (This feature is
not available for all models.)
Ferrite core can be used
to reduce the electro-
magnetic wave when
connecting the power
cord.
The closer the location
of the ferrite core to
the power plug, the bet-
ter it is.
PREPARATION
To Next Page
Loading...
