Press the
MMEENNUU
button and then use
DD
or
EE
button to select the OPTION menu.
Press the G button and then use
DD
or
EE
button to select Language. The menus can be shown on the
screen in the selected language.
Or, Press the
G button and then use
DD
or
EE
button to select Country.
Press the
G button and then use
FF
or
GG
button to select your desired language or country.
Press the
OOKK
button.
The DTV auto tuning will start again when you change the country selection.
Press the
EEXXIITT
button to return to normal TV viewing.
** IIff yyoouu wwaanntt ttoo cchhaannggee LLaanngguuaaggee// CCoouunnttrryy sseelleeccttiioonn
13
ENGLISH
Firstly, connect the power cord correctly.
At this stage, the TV switches to standby mode.
In standby mode to turn TV on, press the
rr
/ I, INPUT or PR
D
or
E
button on the TV or press the
POWER, INPUT, D/A, PR + or - or NUMBER button on the remote control and the TV will switch on.
2
1
TURNING ON THE TV
Initializing setup
Note:
■
It will automatically disappear after approx. 40 seconds unless a button is pressed.
■
Press the BACK button to change the current OSD to the previous OSD.
< Only PLASMA TV Models >
■
"Home” mode is the optimal setting for home environments, and is the TV's default mode.
■
"In Store" mode is the optimal setting for store environments.“ If a user modifies image quality data,
“In Store” mode initializes the product to the image quality set by us after a certain period of time.
■
The mode (Home, In Store) can be changed by executing Factory Reset in the OPTION menu.
If the OSD (On Screen Display) is displayed on the screen after turning on the TV, you can adjust the
Language, Country, Auto programme tuning.
- When your TV is turned on, you will be able to use its features.
ON-SCREEN MENU LANGUAGE / COUNTRY SELECTION
The installation guide menu appears on the TV screen when it is switched on for the first time.
1
2
3
4
5
Press the
DD
or
EE
or F or G button and then,
OOKK
button to select your desired language.
Press the
DD
or
EE
button and then,
OOKK
button to select your country.
1
2
NOTE
GG
If you do not finish the set-up Installation Guide by pressing EXIT or if you time out on the OSD (On
Screen Display) the installation menu will continuously appear until the set up is completed whenever
the TV is switched on.
GG
If you select the wrong local country, teletext may not appear correctly on the screen and some prob-
lems may occur during teletext operation.
GG
The CI (Common Interface) function may not be applied based on country broadcasting circumstances.
GG
DTV mode control buttons may not function based on country broadcasting circumstances
GG
In country that Digital broadcasting regulation isn ’t fixed,some DTV function may not work depending on digital
broadcasting circumstances.
To Next Page
Loading...
