EXTERNAL EQUIPMENT SETUP
34
EXTERNAL EQUIPMENT SETUP
SCREEN SETUP FOR PC MODE
Auto Configure (RGB [PC] mode only)
Press the
MMEENNUU
button and then use or button
to select the
PPiiccttuurree
menu.
Press the button and then use or button to
select
SSccrreeeenn
.
Press the button and then use or button to
select
AAuuttoo CCoonnffiigg..
.
Press the button to start
AAuuttoo CCoonnffiigg..
.
■
When Auto config. has finished, OK will be shown on
screen.
■
If the position of the image is still not correct, try
Auto adjustment again.
If picture needs to be adjusted again after Auto adjust-
ment in RGB (PC), you can adjust the
MMaannuuaall
CCoonnffiigg..
.
Press the
MMEENNUU
button to return to TV viewing.
Press the
RREETTUURRNN
button to move to the previous
menu.
2
1
4
5
3
6
Automatically adjusts picture position and minimizes image
instability. After adjustment, if the image is still not cor-
rect, your TV is functioning properly but needs further
adjustment.
AAuuttoo ccoonnffiigguurree
This function is for the automatic adjustment of the screen
position, clock, and phase. The displayed image will be unsta-
ble for a few seconds while the auto configuration is in
progress.
1
Picture Mode
Color Temperature
Advanced
Aspect Ratio
Picture Reset
Screen
Picture
DE F G
RETURN
2
Picture
Picture Mode
Color Temperature
Advanced
Aspect Ratio
Picture Reset
Screen
To Set
Screen G
DE F G
RETURN
3 4
Screen
Auto config.
Manual Config.
XGA Mode
Reset
To Set
Auto Config. G
DE F G
RETURN
MFL41469209-Edit1-en 5/28/08 11:50 AM Page 34