To Next PageTo Next PageWhat to do if my LG LED TV has no image and sound?
If your LG LED TV isn't turning on and you're getting no image or sound, try these steps: * First, ensure the TV is actually powered on. * Next, check the power cord to confirm it's securely connected to a working wall outlet. Test the outlet with another device to rule out any issues with the power source.
How to fix LG 32LJ600B remote not working?
If your LG LED TV remote isn't working, here are a few things to try: * Make sure nothing is blocking the remote's signal to the TV. * Check for any obstructions over the receiver on the TV. * Replace the remote batteries with a fresh set.
Why does my LG LED TV turn off suddenly?
Your LG LED TV might be turning off suddenly due to a few reasons. First, the power supply could be interrupted, so check your power control settings. Also, verify if the Timer Power Off or Sleep Timer feature is enabled in the Timers settings. Finally, if the TV doesn't receive a signal for 15 minutes, it will automatically shut down.
Why my LG LED TV makes sound?
A cracking noise from your LG LED TV during operation or when turning it off is typically due to the plastic thermal contraction caused by temperature and humidity changes. Additionally, a low-level noise might come from the high-speed switching circuit that supplies power to operate the TV.
General| Screen Size | 32 inches |
|---|---|
| Resolution | 1366 x 768 |
| Display Type | LED |
| Refresh Rate | 60 Hz |
| Smart TV | Yes |
| HDMI Ports | 2 |
| USB Ports | 1 |
| Speaker Output | 10W |
| Built-in Wi-Fi | Yes |
| Operating System | webOS |
| Weight | 4.5 kg |
Essential safety guidelines for using the television set.
Precautions to avoid fire hazards and electrical shock risks.
List of remote control key codes for external device control.
Comprehensive list of commands for controlling TV functions.
Commands for managing power, aspect ratio, and mute functions.
Commands for adjusting volume, contrast, and brightness.
Commands for fine-tuning picture settings like color, tint, and sharpness.
Commands for adjusting audio (treble, bass), OSD, and remote lock.
Commands for adjusting audio equalizer and energy saving modes.
Instructions for tuning channels using serial commands.
Commands to switch between different input sources.
Commands for managing 3D display modes and settings.
Commands for advanced 3D settings and options.
Steps to connect the TV to a network via Wi-Fi or Ethernet.
Steps to identify and fix common network connection problems.
