11
ENGLISH
• Remove the stand before installing
the TV on a wall mount by performing
the stand attachment in reverse.
• For more information of screws
and wall mount bracket, refer to the
Separate purchase.
• If you intend to mount the product to
a wall, attach VESA standard mounting
interface (optional parts) to the back
of the product. When you install the
set to use the wall mounting bracket
(optional parts), x it carefully so as
not to drop.
• When mounting a TV on the wall,
make sure not to install the TV by
hanging the power and signal cables
on the back of the TV.
• Do not install this product on a wall
if it could be exposed to oil or oil mist.
This may damage the product and
cause it to fall.
• When installing the wall mounting bracket,
it is recommended to cover the stand hole
using tape, in order to prevent the inux of
dust and insects. (Depending on model)
Stand hole
To Next Page
Loading...
Need help?
General
