What to do if my LG LED TV remote control is not working?
If you cannot control your LG LED TV with the remote, first, ensure there are no obstructions between the remote and the TV. Then, check the remote control sensor on the TV. Finally, verify that the batteries in the remote are working and correctly installed.
General| Screen shape | Flat |
|---|---|
| Response time | - ms |
| Display diagonal | 32 \ |
| Display brightness | - cd/m² |
| Display resolution | 1360 x 768 pixels |
| Native aspect ratio | 16:9 |
| Native refresh rate | 50 Hz |
| LED backlighting type | Direct-LED |
| Display diagonal (metric) | 81.2 cm |
| Supported graphics resolutions | 1360 x 768 (WXGA) |
| Motion interpolation technology | MCI (Motion Clarity Index) 100 |
| 3D | No |
| Annual energy consumption | 57 kWh |
| Storage temperature (T-T) | -20 - 60 °C |
| Storage relative humidity (H-H) | 0 - 85 % |
| Operating relative humidity (H-H) | 0 - 80 % |
| Tuner type | Analog & digital |
| Analog signal format system | - |
| Digital signal format system | DVB-C, DVB-T |
| Audio system | Virtual Surround |
| RMS rated power | 20 W |
| Number of speakers | 2 |
| HDMI version | 1.4 |
| DVI-D ports quantity | 0 |
| USB 2.0 ports quantity | 1 |
| Audio formats supported | AAC, AC3, HE-AAC, MP3, PCM |
| Image formats supported | JPG, JPS, MPO |
| Video formats supported | DIVX, MPEG |
| Product color | Black |
| Mercury content | 0 mg |
| Panel mounting interface | 200 x 100 mm |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | 12.3 W |
| Power consumption (typical) | 39 W |
| Cables included | AC |
| Operating temperature (T-T) | 0 - 40 °C |
Weight and Dimensions| Depth (with stand) | 207 mm |
|---|---|
| Height (with stand) | 497 mm |
| Weight (with stand) | 6700 g |
| Depth (without stand) | 79 mm |
| Width (without stand) | 738 mm |
| Height (without stand) | 437 mm |
| Weight (without stand) | 6000 g |
To Next Page
