23
206-4340
Ez Download Utility (Cont.)
(Continued from previous page)
TV MANAGER
USB
EZ Download
[TLX] ChMap_IM.tlx
[LOGO] BootLogo.jpg
[EPK] CPU_SW.epk
Back
OK
Channel Tuning /
Channel Banner Display
Logical
Physical
Apply
7. To select or de-select a le, respectively, use the Up/Down arrow keys on the Installer Remote to
highlight the lename, and press OK to add or remove the checkmark at the left of the lename.
Note: The utility will only allow you to select one of each le type for downloading. For example,
if there are two TLX les in the Ez Download list, you can only select one or the other of those
two les.
Note: After the Ez Download utility is run, a le is automatically created and stored on the USB
device that was used. The le, which will have a “.dzm” extension, maintains a history of the
le(s) previously used with the Ez Download utility. The next time(s) you use this USB device
with the Ez Download utility, the le(s) selected for the last download will be pre-selected for
the current download, thus facilitating the process of conguring additional TVs of this model
using the same USB device.
8. The elds at the right of the screen will change depending on the currently highlighted le.
Select the appropriate option(s) for each le, as applicable.
• For software and boot logo image les: The elds at the right of the screen show the TV
software versions and any available Forced Update options. Do not select any Forced Update
options unless you have been specically instructed to do so or have previous experience with
Expert Software Updates.
• For Clone/Conguration (.tlx) les: If the selected Clone/Conguration (.tlx) le includes an
FTG Channel Map, a Channel Tuning / Channel Banner Display eld at the right of the screen
enables you to choose the format for the channel tuning/banner display. Press the green
button on the Installer Remote to select Logical tuning, or press the yellow button on
the Installer Remote to select Physical tuning.
Note: If the selected “.tlx” le does not include an FTG Channel Map, the message, “No
Channel Map in Clone le,” will be displayed at the right of the screen.
(Continued on next page)
To Next Page
Loading...
