73
206-4340
Reference: LT570H Rear and Side Jack Panels
TV-LINK CFG
(
3.5 mm jack) Use to connect PC to
TV (EBL) for local FTG Mode via EBL
configuration.
Side Jack Panel
HDMI IN 2 & 3
Connection for HDMI output
from external device.
USB IN
Insert USB memory device
for software updates, cloning
purposes, FTG Mode via CPU
configuration, picture/music
entertainment, etc., as applicable.
USB IN
3
IN
2
Caution: Do NOT connect a
standard Ethernet cable to the
RJP port, as this may damage
the TV and network equipment.
AV IN / AUDIO IN
L R
SPEAKER OUT
LINE OUT
RJP Use Only
GAME CONTROL
/ MPI
L/MONO -AUDIO- R
ANTENNA /
CABLE IN
LAN
VIDEO
RESET
UPDATE
IN
SERVICE ONLY
TV-LINK CFG
1
OPTICAL
DIGITAL
AUDIO OUT
RS-232C IN (CONTROL&SERVICE)
UPDATE
Restricted to software
updates.
RESET
Initiates a hardware reset
and turns the TV OFF.
SPEAKER OUT
LINE OUT
(
3.5 mm jack) Connect external audio (xed
speaker, variable speaker, or xed line level
[amplier]) equipment. See Reference section,
“External Stereo Speaker Setup,” for further
information.
ANTENNA/CABLE IN
Connect to Antenna/
CATV.
SERVICE ONLY
Restricted to service updates.
AV IN/AUDIO IN
Connect video/audio output from
external device.
OPTICAL DIGITAL AUDIO OUT
Use for amps and home theater
systems. Note: When the TV is
OFF, this port is not enabled.
LAN
Use for network connection
(i.e., for Pro:Centric data).
RJP Use Only
Connection for Remote Jack Pack (RJP)
Control cable.
HDMI IN 1
Connection for HDMI/DVI
output from external device.
RS-232C IN
(CONTROL & SERVICE)
When the TV/EBL is in Pass-
through Mode, the RS-232C
control function enables an external
TLT control device (i.e., VOD/PPV
STB, etc.) to control the TV. Service
for factory use only.
GAME CONTROL/MPI
When the TV/EBL is in Pass-through Mode, the
MPI function enables an external MPI control
device (i.e., VOD/PPV STB, etc.) to control the TV.
Game Control—EBL in SONIFI PPV Mode only.
Note: Placement of connector/port labels
varies slightly depending on model.
To Next Page
Loading...
