LG 32LW5500 - Page 12

Copyright 2011 LG Electronics.Inc.All right reserved.
Only for training and service purposes
C
LGE Internal Use Only- 11 -
4.3.1. Equipment setting
1) Play the LAN Port Test PROGRAM.
2) Input IP set up for an inspection to Test
Program.
*IP Number : 12.12.2.2
4.3.2. LAN PORT inspection (PING TEST)
1) Play the LAN Port Test Program.
2) connect each other LAN Port Jack.
3) Play Test (F9) button and confirm OK Message.
4) remove LAN CABLE
4.4 Model name & Serial number Download
4.4.1 Model name & Serial number D/L
■ Press “Power on” key of service remocon.(Baud rate : 115200 bps)
■ Connect RS232 Signal Cable to RS-232 Jack.
■ Write Serial number by use RS-232.
■ Must check the serial number at Instart menu.