To Next PageTo Next PageWhy does my LG LCD TV turn off suddenly?
Your LG LCD TV might be turning off suddenly due to the power control settings. The power supply may be interrupted. Also, check if the Auto sleep feature is activated in the Time settings. If there is no signal while the TV is on, the TV will turn off automatically after 15 minutes of inactivity.
What to do if my LG 32LW4500 has no image and no sound?
If your LG LCD TV shows no image and produces no sound, verify that the TV is turned on. Check if the power cord is properly connected to a wall outlet. To ensure the wall outlet is working correctly, connect other products to it.
What to do if my LG LCD TV remote control is not working?
If your LG LCD TV remote control isn't working, first check the remote control sensor on the TV and try again. Ensure there are no obstacles between the TV and the remote. Verify that the batteries are working and properly installed. Also, confirm that the appropriate input mode (such as TV or VCR) is set for using the remote control.
Why does my LG 32LW4500 have no sound but image is displaying?
If your LG LCD TV displays images but produces no sound, first, press the + or - button to adjust the volume. Check if the sound is muted by pressing the MUTE button. Try switching to other channels, as there may be a problem with the broadcast. Finally, ensure that the audio cables are connected properly.
What to do if “No Signal” appears on LG 32LW4500 LCD TV screen?
If you see a “No Signal” message on your LG LCD TV screen, first check if the signal cable is properly connected between the TV and any external devices. Next, verify that you have selected the correct input source by pressing the INPUT button.
How to fix a dark screen on my LG 32LW4500?
If the power is on but the screen of your LG LCD TV appears extremely dark, adjust the brightness and contrast in the Picture menu.
Why is my LG 32LW4500 image in black and white or has poor color?
If your LG LCD TV image is displaying in black and white or the color quality is poor, try adjusting the color setting in the Picture menu. Ensure that there is sufficient distance between the TV and other electronic products. The issue may also be with the broadcast, so try other channels.
Why does my LG 32LW4500 image appear slowly when turned on?
The image is muted during the product start up process. This is normal. If the image does not appear in a few minutes, unplug the TV for 30 seconds and try again.
How to adjust display offset on LG LCD TV?
To adjust the display offset on your LG LCD TV, go to the Picture menu and adjust the position setting. Also, check if the video card resolution and frequency are supported by the TV. If the frequency is out of range, set to the recommended resolution using the display settings on the external device.
How to prevent afterimages (ghosts) on LG LCD TV?
Afterimages (ghosts) appear when the product turns off because pixels may have been damaged from a fixed image displayed for a long time (image burn). Use a screen saver to prevent the pixel damage on the screen.
General| Response time | 2.6 ms |
|---|---|
| Display diagonal | 32 \ |
| Display brightness | 400 cd/m² |
| Native aspect ratio | 16:9 |
| Native refresh rate | 60 Hz |
| LED backlighting type | - |
| Supported video modes | 1080i, 1080p, 720p |
| Contrast ratio (dynamic) | 7000000:1 |
| Display diagonal (metric) | 80 cm |
| Supported graphics resolutions | 1920 x 1080 (HD 1080) |
| Motion interpolation technology | TruMotion |
| 3D | Yes |
| Annual energy consumption | 96 kWh |
| Product color | Black |
| Audio system | Infinite Sound |
| RMS rated power | 20 W |
| Number of speakers | 2 |
| Equalizer bands quantity | 5 |
| HDMI ports quantity | 3 |
| Card reader integrated | No |
| USB 2.0 ports quantity | 1 |
| Audio formats supported | MP3 |
| Image formats supported | JPG |
| Video formats supported | DIVX |
| Power consumption (standby) | - W |
Weight and Dimensions| Depth (with stand) | 240 mm |
|---|---|
| Height (with stand) | 551 mm |
| Weight (with stand) | 11400 g |
| Depth (without stand) | 34.9 mm |
| Width (without stand) | 772 mm |
| Height (without stand) | 490 mm |
| Weight (without stand) | 9100 g |
Critical warnings regarding electrical and mechanical safety during device servicing.
Guidelines for safe servicing practices, including transformer use and leakage checks.
Detailed steps for safe component removal and handling of sensitive electronic parts.
Defines the specific TV models and chassis covered by these specifications.
Specifies environmental and power conditions for component testing procedures.
Provides overall technical specifications for the television, including systems and screen sizes.
Details technical parameters for component video inputs, resolutions, and frequencies.
Outlines technical specifications for HDMI inputs for PC and Digital TV signals.
Identifies the TV models and chassis for which adjustment procedures are provided.
Specifies the order, conditions, and requirements for performing TV adjustments.
Explains the Analog-to-Digital Converter (ADC) calibration process and service mode access.
Describes procedures for assembly line adjustments, including white balance preparation.
Instructions for downloading firmware and EDID data for TV components.
