LG 32LY760H - Page 31

31
ENGLISH
EXTERNAL CONTROL DEVICE SETUP
14. Balance (Command: k t)
To adjust balance.
You can also adjust balance in the AUDIO
menu.
Transmission [k][t][ ][Set ID][ ][Data][Cr]
Data L : 00 ~ R : 64 (*transmit by Hexadecimal
code)
*Refer to Real data mapping.
Acknowledgement [t][ ][Set ID][ ][OK/NG][Data][x]
15. 3D (Command: x t) (For 3D TV)
To change 3D mode for TV.
Transmission [x][t][ ][Set ID][ ][Data01]
[ ][Data02][ ][Data03][ ][Data04][Cr]
Data01
00: 3D On 01: 3D Off
02: 3D to 2D 03: 2D to 3D
Data02
00: Top and Bottom 01: Side by Side
02: Check Board 03: Frame Sequential
Data03
00: Right to Left
01: Left to Right
Data04
3D Depth: Min : 00 ~ Max : 14
(*transmit by Hexadecimal code)
*If data01 is 00(3D On), data04 has no
meaning.
*If data01 is 01(3D Off) or 02(3D to 2D),
data02, data03 and data04 have no meaning.
*If data01 is 03(2D to 3D), data02 has no
meaning.
Data 01 Data 02 Data 03 Data 04
00 o o x
01 x x x
02 x x x
03 x o o
x : Don’t care
Acknowledgement [t][ ][Set ID][ ][OK][Data01]
[Data02][Data03][Data04][x]
Acknowledgement [t][ ][Set ID][ ][NG][Data01][x]
16. Color Temperature (Command: x u)
To adjust color temperature.
You can also adjust color temperature in the
PICTURE menu.
Transmission [x][u][ ][Set ID][ ][Data][Cr]
Data Min: 00 ~ Max: 64 (*transmit by
Hexadecimal code)
*Refer to Real data mapping.
Acknowledgement [u][ ][Set ID][ ][OK/NG][Data]
[x]
17. Extended 3D (Command: x v) (For 3D TV)
To change 3D option for TV.
Transmission [x][v][ ][Set ID][ ][Data01][ ]
[Data02][Cr]
Data01: 3D option
00: 3D Picture Correction
01: 3D Depth (2D to 3D Only)
02: 3D Viewpoint
Data02: It has own range for each 3D option
determined by Data01.
1) When Data01 is 00
00: Right to Left
01: Left to Right
2) When Data01 is 01, 02
Data Min: 00 ~ Max: 14 (*transmit by
Hexadecimal code)
Acknowledgement [v][ ][Set ID][ ][OK][Data01]
[Data02][x]
Acknowledgement [v][ ][Set ID][ ][NG][Data01][x]
* Use the feature depending upon your model.