To Next Page

To Previous Page

ENG

ENGLISH

TROUBLESHOOTING

Check

Control Panel ► Display ► Settings

and see if the frequency or the resolution were

changed. If yes, readjust the video card to the recommend resolution.

If the recommended resolution (optimal resolution) is not selected, letters may be blurred and the

screen may be dimmed, truncated or biased. Make sure to select the recommend resolution.

The setting method can differ by computer and O/S (Operation System), and resolution mentioned

above may not be supported by the video card performance. In this case, please ask to the computer

or the video card manufacturer.

CAUTION

The screen is flickering.

Did you select the recommended

resolution?

If the selected resolution is HDMI

1080i

60/50 Hz, the screen may

be flickering. Change the resolution to the recommended resolution

1080P

Display image is incorrect

The screen color is mono or

abnormal.

Check if the signal cable is properly connected and use a screwdriver

to fasten if necessary.

Make sure the video card is properly inserted in the slot.

Set the color setting higher than 24 bits (true color) at

Control Panel

►

Settings

The screen blinks.

Check if the screen is set to interlace mode and if yes, change it to the

recommend resolution.

Do you see an "Unrecognized monitor, Plug&Play (VESA DDC) monitor found" message?

Have you installed the display

driver?

Be sure to install the display driver from the display driver CD (or

diskette) that comes with your display. Or, you can also download the

driver from our web site: http://www.lg.com.

Make sure to check if the video card supports Plug&Play function.

Questions and Answers:

Need help?

Do you have a question about the LG 32MP58HQ and is the answer not in the manual?

LG 32MP58HQ Specifications

General