Why is my LG 32MA70HY screen flickering?
If the selected resolution on your LG Monitor is HDMI 1080i 60/50 Hz, the screen may be flickering. Change the resolution to the recommended resolution 1080P.
What to do if no image appears on my LG 32MA70HY Monitor?
First, ensure the power cord is correctly connected to the power outlet. Then, press the Power button. If the LG Monitor is in power saving mode, move the mouse or press any key on the keyboard. Also, make sure that the PC is turned on. If the signal cable between the PC and the monitor is missing or disconnected, check the cable and reconnect it. If the signal from the PC (video card) is out of horizontal or vertical frequency range of the display, see the 'Specifications' section of this manual and configure your display again.
How to fix incorrect display image on LG 32MA70HY Monitor?
Use the Auto Configuration function and select the "Yes" option to automatically adjust your LG Monitor display image to the ideal setting. Alternatively, go to Control Panel ? Display ? Settings and adjust the display to the recommended resolution or adjust the display image to the ideal setting. Ensure the color setting is higher than 24 bits (true color).
Why is the screen color mono or abnormal on my LG 32MA70HY?
Check if the signal cable is properly connected to your LG Monitor, and use a screwdriver to fasten it if necessary. Also, ensure the video card is properly inserted in its slot. Finally, set the color setting higher than 24 bits (true color) at Control Panel ? Settings.
What to do if I see an "Unrecognized monitor, Plug&Play (VESA DDC) monitor found" message on my LG 32MA70HY Monitor?
Be sure to install the display driver for your LG Monitor from our web site: http://www.lg.com. Also, make sure to check if the video card supports Plug&Play function.
Why does the screen blink on my LG 32MA70HY?
Check if the screen of your LG Monitor is set to interlace mode and if yes, change it to the recommend resolution.
General| Screen Size | 32 inches |
|---|---|
| Panel Type | IPS |
| Brightness | 250 cd/m² |
| Contrast Ratio | 1000:1 |
| Response Time | 5ms (GTG) |
| Refresh Rate | 60 Hz |
| Aspect Ratio | 16:9 |
| Color Gamut | sRGB 99% |
| Resolution | 1920 x 1080 (Full HD) |
| Ports | HDMI, D-Sub |
| Viewing Angle | 178°/178° |
| Power Consumption | 45W (Typical) |
Step-by-step guide on how to assemble the monitor stand.
Steps for detaching the stand and preparing for wall mounting.
Details on VESA mounting standards and screw specifications for wall installation.
Explains Plug & Play functionality and PC connection methods.
Guide for connecting the monitor via HDMI for digital video and audio.
How to navigate and access the On-Screen Display (OSD) menu.
Selecting preset picture modes for different viewing scenarios.
Steps to resolve problems like no image, out of range, or no signal messages.
How to unlock OSD controls if they are unresponsive.
Solutions for incorrect display position, color, blinking, or lines.
Troubleshooting unrecognized monitor messages and driver issues.
To Next Page
