11
ENG
ENGLISH
ASSEMBLING AND PREPARING
Mounting on a table
1
Lift and tilt the Monitor set into its upright
position on a table.
Leave a 100 mm (3.94 inches) (minimum)
space from the wall for proper ventilation.
2
Connect the AC-DC Adapter and Power Cord
to a wall outlet.
100 mm
(3.94 inches)
100 mm
(3.94 inches)
100 mm
(3.94 inches)
100 mm
(3.94 inches)
or
y
Illustrations in this document represent typical pro-
cedures, so they may look different from the actual
product.
y
Do not carry the monitor upside down by just hold-
ing the stand base. This may cause the monitor to
fall off the stand and could result in personal injury.
y
When lifting or moving the monitor, do not touch
the monitor screen. The force applied to the moni-
tor screen may cause damage to it.
y
If you use the monitor panel without the stand
base, its joystick button may cause the moni-tor to
become unstable and fall, resulting in damage to
the monitor or human injury. In addition, this may
cause the joystick button to malfunction.
CAUTION
To Next Page
Loading...
