24
ENG
ENGLISH
CUSTOMIZING SETTINGS
-Auto Configuration
1
To view the OSD menu, press the joystick button at the
bottom of the monitor and then enter the Menu.
2
Go to
Auto Configuration
by moving the joystick.
3
Configure the options following the instructions that appear in
the bottom right corner.
4
To return to the upper menu or set other menu items, move the
joystick to ◄ or pressing (
/ OK) it.
5
If you want to exit the OSD menu, move the joystick to ◄ until
you exit.
Each option is described below.
Menu > Auto Configuration Description
Do you want to Auto Configuration?
Yes Operate the Auto Configuration for optimal display in D-SUB.
Cancel Cancel the select.
Color Adjust
Auto
Configuration
NOTE
y
This function will be enable only in analog input.
To Next Page
Loading...
