To Next Page

To Previous Page

ENG

ENGLISH

ASSEMBLING AND PREPARING

Setting up the Monitor set

Attaching the Stand Base

Please put a soft cloth on a low table or box

to protect the screen of the monitor.

Please put the monitor on the soft cloth with

the screen facing down.

Please grab the

Stand body

in one hand, and

push it in the direction of the arrow to

hinge

body

.After assembling, you must check if the

Stand body

latched in or not.

Please push the

Stand Base

in the direction

of the arrow as shown below and assemble

together.

Please use a driver(-) or coin to insert thumb

screw and turn right arrow direction lock.

* It is necessary to thoroughly tighten it with

Thumb Screw

, or the monitor will shake.

Please set the Monitor upright, and install the

necessary cable.

* Must use one type input cable. Don't use

more than two types cable together.

Stand body

Stand Base

Questions and Answers:

Need help?

Do you have a question about the LG 32MP58HQ and is the answer not in the manual?

LG 32MP58HQ Specifications

General