What to do if the operation does not work normally on my LG Digital Signage?
If the operation of your LG Digital Signage isn't working correctly: * Check if the Timer is set. * Review the power control settings to ensure power hasn't been interrupted.
Why no image is displayed on my LG Digital Signage?
If no image is displayed on your LG Digital Signage, make sure the power cord is correctly plugged into the power outlet. Also, check the signal cable between the PC and the product to ensure it's properly connected. Verify that the input signal is selected correctly by pressing the INPUT menu on the remote control. If the signal from the PC is out of the vertical or horizontal frequency range, adjust the frequency range by referring to the Specifications; the maximum resolution is 1920 x 1080 (60 Hz).
General| Panel Type | IPS |
|---|---|
| Aspect Ratio | 16:9 |
| Viewing Angle (H x V) | 178 x 178 |
| Response Time | 8 ms |
| Operating Temperature | 0 °C to 40 °C |
| Operating System | webOS |
| Connectivity | HDMI, USB, RS232C |
| Orientation | Landscape, Portrait |
| Screen Size | 32 inches |
| Resolution | 1920 x 1080 (Full HD) |
To Next Page
