ENGLISH
30
[Adjust (RGB-PC)]
This feature enables you to configure the PC display options in RGB mode.
• [Set Automatically]: Automatically adjust the screen position, time, and phase. The image displayed on the screen can
be unstable for a few seconds in the process of the configuration.
• [Resolution]: Choose between 1024 x 768, 1280 x 768 and 1360 x 768 resolution.
• [Position]/[Size]/[Phase]: Adjust the options when the picture is not clear, especially when characters are shaky, after
the auto configuration.
• [Reset]: Resets the options to default.
• [Intelligent Auto]: Decides to run Auto Configuration on resolutions recognized for the first time by the RGB input.
[HDMI IT Contents]
Set the HDMI IT Contents function.
• [Off]: Disable the HDMI IT Contents function.
• [On]: Enable the HDMI IT Contents function.
This feature automatically changes the monitor's picture mode based on HDMI Contents information when an HDMI
signal is entered.
Even if the monitor's picture mode has been changed by the HDMI IT Contents feature, you can change the picture
mode again manually.
As this has a higher priority than the picture mode set by the user, the existing picture mode may be changed when
the HDMI signal changes.
To Next Page
Loading...
Need help?
General
