ENGLISH
45
[Setting Data Cloning]
1 Select your desired group and click [Clone].
2 Check that the data have been copied on the slave sets.
[Content Distribution]
1 Select the type of content you wish to distribute (Schedules or Playlists).
2 Select the content you wish to distribute.
3 Select the group to which you wish to distribute the content and click [Distribute].
4 Run the Content Manager app on the slave sets and check that the content has been distributed.
How to Use
• Monitors: Run/add/delete/edit apps in the Launcher bar.
• Mobile devices: Run the app in the Launcher bar or access the app from a mobile device using the QR code or URL
provided.
CAUTION
• You can create up to 25 groups.
• You can add up to 12 slave devices to a group.
• You can distribute the schedules stored on external devices after executing Content Manager's import operation.
• Make sure to delete all schedules stored on the slave sets before distributing any schedules.
• A list of devices you can add to your desired group appears only when the following conditions have been met:
- The devices you wish to add must be on the same network as the master device.
- The devices you wish to add must be in Master mode, and they must not belong to any existing group.
- The UPnP feature must be enabled (go to [General] > [Network] > UPnP and set it to [On]).
• Group Manager 2.0 may not work properly in wireless network environments. It is recommended you use a wired
network.
• Run the initial settings for Slave function when deleting the group.
To Next Page
Loading...
Need help?
General
