3
EXTERNAL EQUIPMENT SETUP
CONNECTING WITH AN HDMI CABLE
CONNECTING WITH A COMPONENT CABLE
NOTE
► The TV can receive video and audio signals simultaneously when
using an HDMI cable.
► If the DVD does not support Auto HDMI, you must set the output reso-
lution appropriately.
► Check that your HDMI cable is version 1.3 or higher.
If the HDMI cables don’t support HDMI version 1.3, flickering or no
screen display can result. Please use the latest cables that support at
least HDMI version 1.3.
1
Connect the HDMI output of the external equipment (digital set-
top box, DVD, etc.) to HDMI/DVI IN 1, HDMI IN 2 (Except for
19/22LD3
***
), HDMI IN 3 (Except for 19/22/26/32LD3
***
,
32/37/42/47LD4
***
, 19/22LE3
***
) or HDMI IN 4 (Only
32/37/42/47/55LE5
***
) jack on the TV.
2
Turn on the external equipment.
(
Refer to the external equipment's manual for operating instruc-
tions.)
3
Select HDMI1, HDMI2 (Except for 19/22LD3
***
), HDMI3
(Except for 19/22/26/32LD3
***
, 32/37/42/47LD4
***
,
19/22LE3
***
) or HDMI4 (Only 32/37/42/47/55LE5
***
) input
source using the INPUT button on the remote control.
1
To Next Page
Loading...
