SOUND & LANGUAGE CONTROL
NICAM Reception (In Analogue Antenna Mode Only - TV)
If the TV is equipped with a receiver for NICAM reception, high quality NICAM (Near Instantaneous Companding Audio
Multiplex) digital sound can be received.
Sound output can be selected according to the type of broadcast received.
➊
When NICAM mono is received, you can select NICAM MONO or FM MONO.
➋
When NICAM stereo is received, you can select NICAM STEREO or FM MONO.
If the stereo signal is weak, switch to FM MONO.
➌
When NICAM dual is received, you can select NICAM DUAL I, NICAM DUAL II or NICAM DUAL I+II or FM
MONO.
Speaker Sound Output Selection
In AV, Component, RGB and HDMI mode, you can select output sound for the left and right loudspeakers.
Select the sound output.
L+R Audio signal from audio L input is sent to the left loudspeaker and audio signal from audio R input is sent to the
right loudspeaker.
L+L Audio signal from audio L input is sent to left and right loudspeakers.
R+R Audio signal from audio R input is sent to left and right loudspeakers.
To Next Page
Loading...
