To Next PageTo Next PageHow to check stand-by voltage on LG LCD TV?
If you're troubleshooting power issues on your LG LCD TV, check the stand-by Voltage at P700 8pin, which should be +5V_ST. If there's a problem, replace the power board.
What to do if HDMI cable conductors are damaged on LG LCD TV?
If you suspect damage to the HDMI cable conductors on your LG LCD TV, particularly an open conductor, the suggested solution is to replace the jack.
What to do if there is no output signal P600 on LG LCD TV?
If you're experiencing issues with the output signal on pins 1, 2, 3, and 4 of P600 on your LG LCD TV, the suggested solutions are to replace the NTP (Audio AMP) IC500 or replace the speaker.
What to do if Mstar LVDS output R812, R813,..., R821 is not working on LG 37LH250H?
If you are experiencing issues with the Mstar LVDS output R812, R813,..., R821 on your LG LCD TV, the suggested solution is to replace the Mstar(IC100) or the Main board.
How to check P700 PWR_ON on LG LCD TV?
If your LG LCD TV isn't powering on, check P700 PWR_ON at the 2pin, ensuring it reads 5V. If there's an issue, the suggested solution is to replace the power board.
General| Display Type | LCD |
|---|---|
| Aspect Ratio | 16:9 |
| Contrast Ratio (Dynamic) | 50, 000:1 |
| Response Time | 5 ms |
| USB Ports | 1 |
| Component Video Input | 1 |
| Composite Video Input | 1 |
| Power Consumption (Standby) | 1W |
| Screen Size | 37 inches |
| Brightness | 500 cd/m² |
| Viewing Angle | 178° (H) / 178° (V) |
| Inputs | HDMI, Component, Composite, USB |
| Sound Output | 20 W (2 x 10 W) |
