LGE Internal Use OnlyCopyright LG Electronics. Inc. All right reserved.
Only for training and service purposes
- 6 -
4. General Specification(TV)
1. Application Range
This specification sheet is applied to the LCD TV used LA96A
chassis.
2. Specification
Each part is tested as below without special appointment
1) Temperature : 25 ± 5°C (77 ± 9ºF), CST : 40 ± 5ºC
2) Relative Humidity : 65 ±10%
3) Power Voltage : Standard input voltage
(100-240V@ 50/60Hz)
* Standard Voltage of each products is marked by models
4) Specification and performance of each parts are followed
each drawing and specification by part number in
accordance with BOM.
5) The receiver must be operated for about 20 minutes prior to
the adjustment.
3. Test method
1) Performance : LGE TV test method followed.
2) Demanded other specification
- Safety : UL, CSA, IEC specification
- EMC : FCC, ICE, IEC specification
SPECIFICATION
NOTE : Specifications and others are subject to change without notice for improvement
.
No Item Specification Remark
1. Receiving System
1) VSB/64 & 256 QAM/ NTSC-M
2. Available Channel 1) VHF : 02~13
2) UHF : 14~69
3) DTV : 02-69
4) CATV : 01~135
5) CADTV : 01~135
3. Input Voltage 1) AC 100 ~ 240V 50/60Hz Mark : 110V, 60Hz
4. Market NORTH AMERICA
32 inch Wide(1366 ◊ 768) HD 32LH250H-UA
37 inch Wide(1366 ◊ 768) HD 37LH250H-UA
5. Screen Size
42 inch Wide(1366 ◊ 768) HD 42LH250H-UA
6. Aspect Ratio 16:9
7. Tuning System FS
LC320WXN-SBA1 LGD 32LH250H-UA
LC370WXN-SBA1 LGD 37LH250H -UA
8. Module
LC420WXE-SBA1 LGD 42LH250H -UA
9. Operating Environment 1) Temp : 0 ~ 40 deg
2) Humidity : ~ 80 %
10. Storage Environment 1) Temp : -20 ~ 60 deg
2) Humidity : ~ 85 %