LG 37LP1D - How to Use; Swivel Stand

20
Installation
How to use back cover
Hold the cover with both hands and
pull
it
backward.
1
Install wires as
necessary.
(To
install various
wires,
refer to
p.21~41.)
2
Reinstall the cover.
4
Align
the holes on the TV back
panel
with the
protuberances
on the back
cover and insert.
3
-
The TV can be
conveniently
swivelled on its stand 30° to the left or
right
to
provide
the
optimum viewing angle.
Swivel Stand
(32/37/42LP1D,
26/32LX2D
only)
Wire
Arrangement
-
Pull the cables
through
the hole on the set.
*
Arrange
the
signal input
cable and the
power
cord
by
holder,
as shown.