LG 42CQ610H User Manual (English)

Other manuals for LG 42CQ610H

Owner's Manual125 pages

Commercial Mode Setup Guide75 pages

Service Manual39 pages

Questions and Answers:

M
marystoneAug 19, 2025
Why is there no picture on my LG 42CQ610H?
- A
  alvaradoamberAug 19, 2025
  If your LG LCD TV shows no picture, several factors could be the cause. First, ensure the TV is turned on. Check that the antenna or cable is securely connected to the TV. Verify all connections on the TV are correct. If applicable, make sure the MPI cable is connected to the MPI device. The channel you are trying to watch might be encrypted, so try another channel. Finally, the tuning band may be incorrect, requiring adjustment in the Installer Menu settings.
K
Karen MataAug 21, 2025
Why is there no picture on my LG LED TV?
- C
  Caitlyn GeorgeAug 21, 2025
  If your LG LED TV shows no picture, several factors could be the cause. First, ensure the TV is turned ON. Check that the antenna or cable is securely connected to the TV. Verify all connections on the TV are correct. If applicable, connect the MPI cable to the MPI device. The channel might be encrypted, so try another channel. Finally, the tuning band could be incorrect; try adjusting the Installer Menu settings.
T
Theresa ColeAug 23, 2025
What to do if the LG LCD TV remote doesn’t work?
- S
  Stephen BartlettAug 23, 2025
  If your LG LCD TV remote is not working, ensure the remote is in 'TV' mode using the MODE key. Point the remote directly at the TV's IR receiver. Make sure you are close enough to the IR sensor and that there are no obstructions in the path. Replace the batteries, ensuring correct polarity (+ and -) in the battery compartment. Dim the room light if it's too bright. If using an installer remote, confirm it is compatible with your TV, or if using a bed switch, ensure it is set to the correct bed.
F
Felicia ZunigaAug 26, 2025
Why is there no picture on my LG TV?
- B
  Brandon EdwardsAug 26, 2025
  There could be several reasons why there's no picture on your LG TV. It could be as simple as the TV being turned off, so make sure to turn it on. Check if the antenna or cable is properly connected to the TV. Ensure all connections are correct. If applicable, verify that the MPI cable is connected to the MPI device. The channel might be encrypted, so try switching to another channel. Finally, the tuning band could be incorrect, so you may need to adjust the Installer Menu settings.
M
matthewscottAug 28, 2025
What to do if the remote doesn’t work with my LG TV?
- J
  John WeberAug 28, 2025
  If your LG TV remote isn't working, first ensure that it's set to 'TV' mode using the MODE key. Point the remote directly at the TV's IR receiver. Try moving closer to the TV or dimming the room if the remote is too far or there's too much light. Check and replace the batteries if they are weak, ensuring the '+' and '-' polarities match in the battery compartment. Remove any obstructions blocking the path to the TV's receiver. If applicable, connect the MPI cable to the MPI device. If none of these steps work, you might need a compatible Installer Remote; contact your LG dealer.
R
richard53Aug 30, 2025
Why does my LG TV have normal picture but no sound?
- S
  Susan FreemanAug 30, 2025
  If you're getting a picture but no sound on your LG TV, the issue could be due to a broadcast problem, so try changing the channel. Ensure the audio isn't muted by pressing the MUTE button or using the Volume Up key. Also, check that Installer Menu items 020 FEATURE LEVEL and 027 HOSPITAL MODE are set as required, as an improperly configured pillow speaker or TV speaker could be the cause.
T
timothymooreSep 2, 2025
What to do if my LG LED TV remote doesn't work?
- A
  Amanda PrattSep 2, 2025
  If your LG LED TV remote isn't working, first ensure the remote is in TV Mode by pressing the MODE key. Point the remote directly at the TV's IR receiver. Move closer to the TV or darken the room, as distance and light can interfere. Check and replace the batteries, ensuring correct polarity (+ and -). Remove any obstructions between the remote and the TV. If applicable, connect the MPI cable to the MPI device. The room might have too much light, so dim it. If it's the wrong installer remote, contact your LG dealer. Finally, adjust the Bed Switch or update the Installer Menu if the Bed Switch is set to the wrong bed.
M
Mrs. Patricia MorseSep 4, 2025
What to do if my LG LED TV has normal picture but poor or no sound?
- A
  Ann AliSep 4, 2025
  If your LG LED TV has a normal picture but poor or no sound, the issue could stem from several sources. First, try a different channel to rule out a broadcast problem. Ensure the audio isn't muted by pressing the MUTE button or using the Volume Up key. Check that Installer Menu items 020 FEATURE LEVEL and 027 HOSPITAL MODE are set correctly. If applicable, select TV Speaker in the Audio Menu.
C
Cynthia WardSep 6, 2025
What to do if my LG 42CQ610H LCD TV has normal picture but poor or no sound?
- J
  Joseph WoodsSep 6, 2025
  If your LG LCD TV has a normal picture but poor or no sound, the issue could be due to a broadcast problem, so try a different channel. Check if the audio is muted and increase the volume. Also, verify that the Pillow/TV speaker is configured properly by checking Installer Menu items 020 FEATURE LEVEL and 027 HOSPITAL MODE. If applicable, select TV Speaker in the Audio Menu.
A
aharrisSep 8, 2025
What to do if I can't direct enter channel number on my LG LCD TV?
- S
  sonyacurtisSep 8, 2025
  If you cannot directly enter a channel number on your LG LCD TV, it could be due to the TV being in Pass-through Mode with Installer Menu item 028 CH. OVERIDE set to 0. To resolve this, set Installer Menu item 028 CH. OVERIDE to 1. Alternatively, if the TV is in FTG Mode, the channel entered may not be part of the FTG Channel Map; if necessary, make changes to the FTG Channel Map using the FTG File Manager or the FTG Configuration Application.