24
ENG
ENGLISH
MAKING CONNECTIONS
Adapter connection
(Only 19/22/26LS35**)
DC IN
DC Adapter
1 Connect the antenna cable to the antenna
input port on the TV.
2 Connect the DC adapter plug to the power
input jack on the TV.
3 Connect the power cord to the DC adapter rst,
then plug the power cord into the wall power
outlet.
CAUTION
y
Please be sure to connect the TV to the DC
power adapter before connecting the TV’s
power plug to a wall power outlet.
Antenna connection
ANTENNA/
CABLE IN
13/18V
700mA Max
LNB IN
Satellite
Connect the TV to a wall antenna socket with an
RF cable (75 Ω).
NOTE
y
Use a signal splitter to use more than 2 TVs.
y
If the image quality is poor, install a signal
amplifier properly to improve the image
quality.
y
If the image quality is poor with an antenna
connected, try to realign the antenna in the
correct direction.
y
An antenna cable and converter are not
supplied.
Satellite dish connection
(Only satellite models)
13/18V
700mA Max
LNB IN
Satellite
Connect the TV to a satellite dish to a satellite
socket with a satellite RF cable (75 Ω).
To Next Page
Loading...
