D. Function error_ No response in remote controller,
Established
Error
Standard Repair Process Detail Technical Manual
Remote controller operation checking method
ey erro
<ALL MODELS>
A27
date
Revised
date
symp
om
Content
LCD TV
.
.
FRONT REAR
1
GND
2
KEY1
3
KEY2
4
+3.5V_ST
③
A Type
B Type
5
GND
6
LOGO/LED_R
7IR
8GND
④
C Type
10 N/A
Checkin
order
①
②
1, 2. Check IR cable condition between IR & Main board.
3. Check the st-by 3.5V on the terminal 6.
4. When checking the Pre-Amp when the power is in ON condition, it is normal when the Analog
Tester needle moves slowly, and defective when it does not move at all.
30 / 97
Copyright ⓒ 2014 LG Electronics. Inc. All right reserved.
Only for training and service purposes