What to do if the LG 42LB5610 remote control is not working?
If you cannot control your LG LED TV with the remote, first check the remote control sensor on the TV and try again. Also, ensure there are no obstacles between the remote and the TV. Finally, verify that the batteries in the remote are working and properly installed.
Why does my LG 42LB5610 LED TV turn off by itself?
If your LG LED TV turns off suddenly, it might be due to a few reasons. First, examine the power control settings in case the power supply is interrupted. Also, verify if the Off Time or Sleep Timer feature is enabled within the TIME settings. Lastly, the TV automatically shuts down after 15 minutes of inactivity if no signal is detected.
How to fix LG 42LB5610 remote control not working?
If your LG LED TV isn't responding to the remote, first, make sure nothing is blocking the remote's signal by covering the receiver on the TV. Then, check for any obstacles between the remote and the TV. If that doesn't work, try replacing the batteries in the remote with new ones.
Why does my LG 42LB5610 LED TV turn off suddenly?
Your LG LED TV might be turning off suddenly due to several reasons. Check the power control settings to ensure the power supply isn't interrupted. Also, verify if the Sleep Timer or Off Time feature is activated in the TIME settings. If the TV is on but not receiving a signal, it will automatically turn off after 15 minutes of inactivity.
What to do if my LG LED TV has no image and sound?
If your LG LED TV shows no image and produces no sound, first ensure that the TV is turned on. Next, check that the power cord is properly connected to a working wall outlet. You can verify the outlet's functionality by connecting other products to it.
What to do if my LG 42LB5610 LED TV turns off by itself?
If your LG LED TV is turning off unexpectedly, there are a few things you can check. First, review the power control settings to make sure the power supply isn't being interrupted. Next, verify that the Off Time or Sleep Timer feature isn't activated in the TIME settings. Also, if the TV is left on without a signal, it will automatically turn off after 15 minutes of inactivity.
What to do if LG 42LB5610 LED TV remote is not working?
If you're unable to control your LG LED TV with the remote, start by checking if anything, like tape, is covering the receiver. Ensure there are no obstructions between the remote and the TV. If the issue persists, replace the remote's batteries with new ones.
What to do if my LG 42LB5610 remote control is not working?
If you cannot control your LG LED TV with the remote, first check the remote control sensor on the TV and try again. Ensure there are no obstacles between the remote and the TV. Also, verify that the batteries in the remote are working and properly installed.
Why is my LG 42LB5610 LED TV remote not working?
General| Screen shape | Flat |
|---|---|
| Response time | - ms |
| Display diagonal | 42 \ |
| Display brightness | - cd/m² |
| Native aspect ratio | 16:9 |
| Native refresh rate | 50 Hz |
| LED backlighting type | - |
| Display diagonal (metric) | 106 cm |
| Supported graphics resolutions | 1920 x 1080 (HD 1080) |
| Motion interpolation technology | MCI (Motion Clarity Index) 100 |
| 3D | No |
| Annual energy consumption | 76 kWh |
| Audio formats supported | AAC, MP3, OGG, PCM, WAV, WMA |
| Video formats supported | 3G2, 3GP, AVC, DIVX, H.264, M2TS, M4V, MKV, MOV, MPEG2, MPEG4, MTS, TP, TS, WMV, XVID |
| Digital signal format system | DVB-T |
| Audio decoders | Dolby Digital |
| RMS rated power | 20 W |
| Number of speakers | 2 |
| DVI-D ports quantity | 0 |
| USB 2.0 ports quantity | 1 |
| Product color | Black |
| Mercury content | 0 mg |
| Panel mounting interface | 400 x 400 mm |
| Power consumption (standby) | 0.3 W |
| Power consumption (typical) | 52 W |
| Sustainability certificates | ENERGY STAR |
| Cables included | AC |
Weight and Dimensions| Depth (with stand) | 218 mm |
|---|---|
| Height (with stand) | 610 mm |
| Weight (with stand) | 9500 g |
| Depth (without stand) | 56 mm |
| Width (without stand) | 961 mm |
| Height (without stand) | 567 mm |
| Weight (without stand) | 9200 g |
Advice for individuals with photosensitive seizures or chronic illnesses when viewing 3D content.
Identifies symptoms like fatigue or discomfort that necessitate stopping 3D content viewing.
Detailed instructions on operating TV functions using the joystick button.
Step-by-step guide for attaching the TV stand to various model types.
Instructions for attaching an optional wall mount bracket to a solid wall securely.
Details on connecting a phone-jack to RS-232 cable for PC to TV communication.
Diagrams and pin configurations for 3-wire RS-232C connections between PC and TV.
Regular cleaning instructions for the TV screen, frame, cabinet, stand, and power cord.
Details how video input automatically switches to 3D screen format.
Instructions for manually converting settings to view 3D images when automatic switching fails.
Details on connecting a USB to Serial converter for external control of the TV.
Instructions for connecting a PC to the TV using an RS-232C cable for external control.
A comprehensive list of commands, their parameters, and hexadecimal data for controlling TV functions.
Details the format for sending commands to the TV, including command structure and data transmission.
Explains the acknowledgement format for successful command reception and status reporting.
Details the format for acknowledging abnormal data and communication errors.
Provides a conversion table for hexadecimal data used in commands to decimal values.
To Next Page
