89
WATCHING TV / CHANNEL CONTROL
SIMPLINK Functions
ꔛ
Direct Play: After connecting AV devices to the TV, you can directly control the devices and play media
without additional settings.
ꔛ
Select AV device: Enables you to select one of the AV devices connected to the TV.
ꔛ
Disc playback: Control connected AV devices by pressing the ꕌꕍ
< >
, ENTER, ꕖ, ꕗ, ꕘ, ꕚ and ꕙ but-
tons.
ꔛ
Power off all devices: When you power off the TV, all connected devices are turned off.
ꔛ
Switch audio-out: Offers an easy way to switch audio-out.
ꔛ
Sync Power on: When the equipment with Simplink function connected HDMI terminal starts to play,
The TV will automatically turn on.
Note: To operate SIMPLINK, an HDMI cable over Version 1.3 with *CEC function should be used. (*CEC:
Consumer Electronics Control).
(A device, which is connected to the TV through a HDMI cable but does not support SIMPLINK, does
not provide this function)
NOTE
► Connect the HDMI/DVI IN or HDMI IN terminal of the TV to the rear terminal (HDMI terminal) of
the SIMPLINK device with the HDMI cable
► When you switch the Input source with the INPUT button on the remote control, the SIMPLINK
device will stop
.
► When you select a device with home theater functionality, the sound output automatically swit
ches
to the home theater speakers and the TV speakers are turned off.
► If a connected SIMPLINK home theater system doesn’t play the audio from the TV, connect the
DIGITAL AUDIO OUT t
erminal on the back of the TV to the DIGITAL AUDIO IN terminal on the
back of the SIMPLINK device with an OPTICAL cable.
To Next Page
Loading...
