PREPARATION
14
STAND INSTRUCTIONS
(For
22/26LE6500
)
ꔛ
Image shown may differ from your TV.
1
Carefully place the TV screen side down
on a cushioned surface to protect the
screen from damage.
2
Assemble the TV as shown.
3
Install the 2 screws into the holes shown.
INSTALLATION
NOTE
► When assembling the desk type stand,
make sure the screws are fully tightened (If
not tightened fully, the TV can tilt forward
after the product installation). Do not over
tighten.
M4 x 16
DETACHMENT
1
Carefully place the TV screen side down
on a cushioned surface to protect the
screen from damage.
2
Remove the screws that hold the stand on.
3
Detach the stand from TV.
To Next Page
Loading...
