NOTE
►
Some menus may not work while watching the TV in 3D.
► The 3D imaging mode is disabled automatically when switching DTV channels.
► The screen may not be displayed properly if you view 2D DTV images in 3D imaging mode.
►3D effect can be seen when 3D Mode is selected appropriately for the 3D input signal supplied
to the TV.
►
For *mpo files (3D camera files), the 3D imaging mode is enabled automatically.
Make appropriate adjustments.
3D Picture Size: Cuts off the outer edges of the
picture and stretch it to fit the full screen in 3D
mode.
3D Depth: Adjusts the distance between the
object and the background in the picture to
enhance the 3D effect in 2D to 3D mode.
3D Viewpoint: Brings the picture (including
both the object and background images) to the
front or back to enhance the 3D effect in 3D
mode.
3D Picture Balance: Adjusts the color and
brightness difference between the right and left
sides of the picture in 3D mode.
3D Picture Correction: Changes the order of
images in the right and left sides of the picture
in 3D mode.
To Next Page
Loading...
