1. Factory Reset
1.1 When to do Factory Reset?
When you feel any abnormality in Picture and Sound settings, you can use this
function to reset all the settings to initial condition.
1.2 How to do Factory Reset?
Follow below on- screen instructions for Fa ctory Reset.
1. Press
SETTINGS
and th e Navigation buttons to scroll to
OPTION
.
2. Press the Navigation buttons to scroll to the
Initial sett ing
and pre ss OK.
3. Select
Home Use
mode and press OK.
4.
Auto Tu nin g
message window will appear press next and follow instructions.
St ep 1 Step 2 Step 3 Step 4
Note:
Changing Mode S etting (Home Use
Store Demo) will reset all Channel
Information and need to st ore all Channel data.
2. Signal Strength Indicator
Use this function to know t h e quality of RF cable signal.
Signal strength is displayed in channel information wi ndow.
A high signal level indicates a g ood signal quality.
Go od Signal Weak Signal
If picture quality is not good or distorted, u s e this functi on to check the signal strength.
Note: If signal strength is low then contact your cable operator.
To Next Page
Loading...
